Tactical Gear

RCBS Matchmaster Trims 600+ Cases an Hour in Bench Test

November 18, 2026

The Firearm Blog put the RCBS Matchmaster Precision Case Trimmer through months of real reloading bench work and came away calling it the best high-volume rifle brass trimmer the reviewer has used.

Snapshot

The review, written by a reloader who loads thousands of rounds a year for highpower, bullseye, NRL Hunter and other match use, compares the RCBS Matchmaster against prior tools like a Lyman Case Trim Xpress. The writer reports fast setup, strong consistency and a dramatic speed advantage over older trimming methods, while flagging the cutter-head cost and swap time as the main drawbacks.

Key points

  • Setup: Assembly took about 20 minutes with basic hand tools; cutter adjustment is the trickier step, and RCBS also sells preset cutter heads per caliber to speed caliber changes.
  • Speed: Timed tests show 100 pieces of Lake City 5.56 trimmed in 9:47 and 100 pieces of .308 in 9:18, both over 600 cases per hour.
  • Comparison: The writer's old Lyman setup managed only 204 pieces per hour on 6mm ARC brass, roughly a third of the Matchmaster's pace.
  • Versatility: It trims primed brass since it indexes off the shoulder rather than through the flash hole, and handled long cases like .30-06 with a slightly slower cycle.
  • Trade-offs: Brass shavings build up quickly under the included guard, and the main drawback the reviewer cites is price.

Quick take

For a reloader cranking out match-grade brass in bulk, this looks like a legitimate upgrade over hand-crank trimmers. The Firearm Blog frames it like a premium chronograph purchase: expensive, single-purpose, but worth it if you'll actually use it enough. If brass prep is your bottleneck, this is the tool to look at.

Read the full story: thefirearmblog.com